(UNI) University Center

  1. Turn on the equipment you need to use. Typically we start with the PC but it could include the DVD or VHS player, as well
     
  2. With the remote control, turn on the Data Projector (click the power button while pointing it at the data projector on the ceiling)
    • Let it warm up (approximately 2 minutes)
    • With the RGB button toggle through the following options to select your input (display) source:
      • RGB = Computer
      • BNC = Laptop or Document Camera
      • DVI (no signal available)
         
  3. For sound, turn on the audio receiver and select Input. Control volume with large round knob on far right of receiver. If you're using a laptop and need sound, please contact Ken or Adam well ahead of your class so they can help you get that setup well beforehand.
     
  4. Each device is controlled with the buttons on its face: PLAY, PAUSE, FAST FORWARD, etc. DVD Menu Buttons
     
  5. The lectern LCD screen input is controlled by the Source button.  It cycles through PC, VCR, DVD and TV (no tv signal).  It is independent of the data projector.
     
  6. When finished, please ALWAYS turn off the equipment (log off your PC connection), especially the data projector as its bulbs are very expensive. Thank you! ;)